Sailing Boat Bimini Top Guide

How to take measurements for the stern Bimini

Bimini Tops for sailing boats are designed to create shade in the steering gear area and are generally installed on the stern pulpit with special fixing accessories. Frame is made of stainless steel tube and depending on the length that can be developed, it can have 2 or 3 arches. Canvas is made of acrylic fabric and where necessary, is provided with a passage for simple backstay or doubled.
This guide explains how to take the necessary measurements for realization.

  1. Take the width measure from one pushpit centre to the other as in picture 1
  2. Take measurements as shown in picture 2

A: BIMINI TOP HEIGHT

B: BIMINI TOP LENGTH

C: DISTANCE BETWEEN THE BACKSTAY AND THE END OF THE BIMINI TOP TOWARDS STERN

D: DISTANCE BETWEEN THE BACKSTAY AND THE END OF THE BIMINI TOP TOWARDS BOW

E: PUSHPIT HEIGHT

SEE SOME CUSTOMIZED BIMINI TOPS FOR SAILING BOATS

Information request

You haven't found what you were looking for? Write us and ask for all you wish to know.

I have read and accept the conditions of the privacy policy

NETTUNO Marine Equipment® di Garofalo Gennaro
Factory: Via Lama, 60 - 61025 - Montelabbate (PU) - ITALY
Registered office: Via Luigi Guidi, 6 - 61022 - Vallefoglia (PU - ITALY
VAT N. 02237570417 - C.F. GRFGNR58P25L259N - REA 165761
P.h.: +39 0721 499984 - Fax: +39 0721 1850049 - info@nettunome.com

Invoice software